You need these audio cables for your turntable and for your speakers!

Choosing the right audio cables for your turntable and speakers can be quite tricky. As a beginner, it is not always clear which cables you need exactly, how expensive they may be and what influence they have on the sound. In this blog we explain why good audio cables are important, what types there are and what you should pay attention to when choosing the right cables for your installation.

Why are good audio cables important?

Audio cables form the connection between your turntable, amplifier and speakers. They ensure that the sound signal is passed on without interference or loss of quality. Bad cables can cause noise, hum or even signal loss, which negatively affects the sound quality. That is why it is important to choose the right cables, suitable for your hi-fi system.

What cables do you need?

With a record player and audio system you often have to deal with different cables:

• Tulip (RCA) cables : Use these to connect your record player to an amplifier or preamplifier.

• Ground wire : Some turntables require a separate ground wire to prevent humming noises.

• Speaker cables : These connect your amplifier to your speakers and come in different thicknesses.

• Digital Audio Cables : In some installations, such as a modern receiver, optical or coaxial cables may be required.

Different types and materials

Material

Most audio cables are made of copper, because copper is an excellent conductor. However, there are differences in quality:

• Oxygen-Free Copper (OFC) : These cables have fewer impurities, which gives them better conductivity.

• Silver-plated copper : These cables conduct better in the higher frequencies and are sometimes used in high-end systems.

Thickness of the cables

For speaker cables, the thickness is important. Cables that are too thin can lead to signal loss, especially over longer distances. Common thicknesses are:

• 0.75 mm²: Suitable for small systems or short distances.

• 1.5mm²: A standard choice for most installations.

• 2.5mm²: For more powerful amplifiers and longer distances.

• 4.0 mm²: Mainly used for high-end audio or very long cable runs.

Confirmation of cable ends

There are several ways to secure the cables:

• Tulip plugs (RCA connectors) : Used for the connection between the turntable and the amplifier.

• Banana Plugs : Easy to use and provide a solid connection to speakers and amplifiers.

• Cable lugs or forks : Used on some speaker terminals for a secure connection.

• Bare wire : You can also connect speaker wires without plugs, but this may be less secure and may come loose more quickly.

Which cables are suitable for your installation?

• Beginner Setup : A standard RCA cable and a ground wire are usually sufficient.

• Mid-range hi-fi set : Use quality OFC cables and possibly banana plugs for better connections.

• High-end system : Silver-plated copper, thicker cables and high-quality connectors can help you get the most out of your installation.

Conclusion

The right audio cables can make a big difference in your sound experience. When making your choice, pay attention to the type of cable, the thickness and the connection options. A good investment in cables ensures a stable and interference-free sound, without having to spend unnecessarily much. Choose what suits your installation and enjoy your music in the best quality!